with integrated sensor electronics
The HM TC-R turbine flow meter series (TC-R for BSPP ports and compact electronics) is used to measure continuous and discontinuous flow rates. Mainly used for non-lubricating media. Especially well-suited for low-viscosity fluids such as water and solvents.
Only high-grade steels that even withstand corrosive liquids are used in the production of turbine flow meters. This flowmeter with integrated sensor electronics is extremely compact with small dimensions. Combined with the use of tungsten carbide bearings, the HM TC-R guarantees optimum measurement accuracy and an extremely long service life even under the toughest application conditions.
Technical Data
Measuring Ranges: 0.3 up to 85 l/min
Measuring Accuracy: up to ±0.1 %
Repeatability: ±0.05 % (under the same conditions)
Linearity: ±1 % of actual flow (viscosity 1 mm²/s)
Viscosity Range: 0.6 up to 1 mm²/s
Materials:
Housing: as per DIN 1.4305 [AISI 303]
Wheels: as per DIN 1.4460 [AISI 329]
Bearing: Tungsten carbide sleeve bearing
Pressure: up to 630 bar [9,135 psi]
Medium Temperature: -40 °C up to +80 °C [-40 °F up to +176 °F]
Pickups and Amplifiers
Frequency output push-pull
Compact, integrated in the housing
Electrical connection: 12×1 plug, 5 pin, type 713, A coded
