Turbine Flow Meters with Ermeto Fittings (HM E)

Turbine Flow Meters with Ermeto Fittings (HM E)

for lubricating and non-lubricating media

The HM E turbine flow meter series (E for Ermeto Fittings) is used to mea¬sure continuous and discontinuous flow rates. They are mainly used for lubrication and non-lubrication media. They are particularly suitable for low and medium viscosity liquids, such as water, emulsions, glycol mixtures and light oils. Even the measurement of cryogenic fluids is possible.

Only high-grade steels that even withstand corrosive liquids are used in the production of turbine flow meters. Combined with the use of tungsten carbide bearings, the HM E guarantees optimum measurement accuracy and an ex¬tremely long service life even under the toughest application conditions.

Technical Data
Measuring Ranges: 0.3 up to 500 l/min
Measuring Accuracy: up to ±0.1 %
Repeatability: ±0.05 % (under the same conditions)
Linearity: ±1 % of actual flow
Measuring Span:
Standard: 1:10
Extended: on request
Viscosity Range: 0.8 up to 30 mm²/s
Materials:
Housing: as per DIN 1.4404 [AISI 316L] (others on request)
Wheels: as per DIN 1.4460 [AISI 329] (others on request)
Bearing: Tungsten carbide sleeve bearing
Pressure: up to 630 bar [9,140 psi]
Medium Temperature: -60 °C up to +350 °C [-76 °F up to +662 °F]

Generic selectors
Exact matches only
Search in title
Search in content
product
Filter by Categories
Career
News