for monitoring heating and cooling circuits
The HM P (P for Pelton wheel) series turbine flowmeter works according to the Pelton wheel turbine principle and is used to measure continuous and discontinuous volume flows. It is used primarily for cost-effective flow rate measurement in heating and cooling circuits. Even heavily contaminated media at very high temperatures can be measured thanks to the special design and bearing concept. Only high-grade steels that even withstand corrosive liquids are used in the production of the turbine flowmeter. Combined with the use of highly wear-resistant ceramic bearings, the HM P guarantees optimum measurement accuracy and an extremely long service life even under the toughest application conditions.
Technical Data
Measuring Ranges: 3.0 up to 280 l/min
Repeatability: ±0.5 % (under the same conditions)
Linearity: ±2.5 % of actual flow (viscosity 1 mm²/s)
Viscosity Range: 0.8 up to 10 mm²/s
Materials:
Housing: as per DIN 1.4305 [AISI 303]
Wheels: as per DIN 1.4122
Bearing: Brass, Ceramics
Seals: FKM, graphite
Pressure: up to 20 bar [290 psi]
Medium Temperature: -60 °C to +350 °C [-76 °F up to +662 °F]
