EPU Clamp-On Ultrasonic Flowmeter

EPU Clamp-On Ultrasonic Flowmeters measure by using ultrasonic pulse waves to pass through the probe and strike the liquid material. While the pulse waves rapidly disperse through the liquid, the liquid flow will cause a small change in the rate at which the pulse waves are spread. This change in time at which the pulse waves are dispersed is proportional to the flow rate of the liquid. Hence, the flow rate of the liquid is derived.


EPU Clamp-On Ultrasonic Flowmeter

No intrusion in the pipeline during measurement of flow rate, hence no adverse effects will be caused on the pipeline or process liquid. 
LCM display of instantaneous flow rate and cumulative amount. Standard 4-20mA, pulse wave output, RS485 Modbus communication.
High-quality, durable, and reliable.
Applicable to all types of liquids that without air, sediment or sludge.
Able to measure both volume and flow rate of liquid.
Languages on operation interface: traditional Chinese, simplified Chinese, and English.
IP67 protection level, with waterproof transducer.

HUMY Continuous online moisture measuring system

The moisture in solids is an important parameter which strongly influences the quality of the product and can increase the economic efficiency of a production fundamentally. HUMY 3019 is in many processes, successfully in use among others at sugar, tobacco, grain, malt, flour, coal, sand, wood shavings, dried food, fertilizer, powder, pigments, plastic granules. As installation places conveyor belts, screw conveyors, silos, funnels are particularly suitable. The In-Line moisture measurement is also possible in batch processes. At the measuring the relative permittivity and the high-frequency recession of the solid is measured in the high-frequency range. The measurement procedure makes a short and simple calibration as well as a high precision of up to 0.1% possible. The measuring probe transmits the data digitally. This makes the measurement assignment disturbance insensitive and allows a distance of the sensor to the end judging unity up to 1000 m. The system supervising itself has an integrated data lugger besides an automatic compensation of temperature and ageing drift, digital and alarm exits. The device is working by two analog output for the measured values and can be used automatically by the two digital inputs or the RS485-interface. The calibration will be done be the included software. For product or process changes different product parameters can be stored.

FS700E/FS710E Dust monitoring for filter break

The technology is based on a modified triboelectric principle detecting particles interacting with the sensing rod and such particles just passing the rod. Build up on the rod surface will not be detected, only moving particles generate a flow rate proportional signal which is monitored by the electronic. Installation is done on the clean gas side downstream the filter at a metal duct by welding on of a thread bush boring through the duct wall and screwing in dust watch. On and off distance should this 3-fold of the pipe diameter area, the sensor length 1/3 to 2/3 of the pipe diameter. The device isn’t usable at products, which build an electric conductive coating between sensing rod and pipe wall, caused of abrasion.

FS510M/FS520 flow switch for bulk materials

The measurement procedure of the FlowSwitch 510M is based on the physical principle of the Doppler-Effect. Therefore the sensor sends out a microwave field. If solids move through this field, the microwaves are reflected and received by the sensor again. This is converted into a switching process. All parameters, like sensitivity, damping, filter time and hysteresis are freely adjustable and, can be configured, due to the bargraph, with an exact value. This enables a variable determination of the switching point resp. a switching process for different mass flows. The installation can be carried out within pipes, on conveying belts, on fall plates, chutes or at similar transport facilities. The assembly is simply, economical and easy also afterwards possible.

LC510M Contactless level monitoring

Main Benefits: Reliable microwave measuring principle Self-monitoring with additional relay For level monitoring Adjustable sensitivity, damping, hysteresis and filter function Adjustment via 2 key buttons and bargraph Easy installation by compact form Process connection with flange, thread, etc.

MF3000 Mass flow measurement for bulk materials

Our solid flow meter MF 3000 is designed for flow measurement in metallic pipes from a few kg/h to many t/h. The system is suitable for on-line measurements of powders, dusts, pellets, and granules from 1 nm up to 2 cm in pneumatic or free fall conditions. The measurement principle of the MF 3000 is based on the physical Doppler-Effect, whereas the sensor generates a uniform field in the microwave frequency range inside the pipe. These microwaves are being reflected by particles passing through the pipe. Calculation of frequency and amplitude changes allows for accurate determination of solid flow. Non-moving particles like dust accumulation are excluded from the calculation. The installation is simple and cost effective via a welded branch, through which the sensor is screwed flush to the inside of the pipe. The sensor is connected to a DIN-rail mounted transmitter with 4…20 mA, RS232 and RS485 output. The calibration is easy by using our MF–SMART software and a reference flow value.

SCX2 Tuning Fork Level Switch

The SC Series tuning fork liquid level switch does not require any calibration, is easy to install and will operate properly as a high, low or intermediate level switch with a wider range of fluids. A “sister” product line, the SC35 series vibrating fork level switch for powder and bulk solids, the SC series tuning fork liquid level switch has the same high reliability and performance.

SIS Sanitary Intelligent Level Switch

Used for high, low position alarm in production process tank or pipelines.The compact design to facilitate carrying and transporting, and can be quickly installed even in the area of narrow space or difficult operation. Suitable for use in the CIP and SIP cleaning applications, the surface roughness (Ra) level can be adjusted according to customer’s needs, suitable for use in pharmaceutical and food processing industry applications.

SDX Optical Level Switch

The SD Series optical level switch uses the principle of light reflection in a prism to sense the absence or presence of a liquid at the point where the sensor is installed in a tank, pipeline or other type of container.

JFR3 FMCW Radar Level Transmitter

JFR3 FMCW radar level transmitter is a non-contact measuring device, suitable for liquid level measurement in most tanks. It is easy to install, convenient to maintain, and can be used in corrosive applications. With its high precision and stability, it is widely used in liquid level detection and process control in the industrial field. FMCW radar (JFR) adopts a high frequency (GHz level) scanning method; electromagnetic waves are transmitted from the antenna to the target to be measured, then reflected to the receiver over time. During this period, a frequency difference will appear, which can be further calculated to obtain the distance from the transmitting end to the measured object. FineTek FMCW radar uses K Band frequency scanning, with a measurement bandwidth of around 1 GHz. The frequency difference is processed by Fast Fourier Transformation (FFT) which can accurately distinguish the main signal from background noise or echoes. Using a phase-lock Loop (PLL) circuit will result in a high accuracy and reliable measurement.

FFX Side Mounting Float Switch

The FF Series is a magnetic float level switch specifically designed for mounting on the side of a vessel where float orientation is horizontal. It is suitable for industrial use with a wide range of fluids where the float level switch will operate with fluid density as low as 0.25 S.G..

FDX Magnetic Float Level Switch

The FC/FD Series is a magnetic float level switch product line. They are top mounted units designed to provide cost-effective multiple switch points using a single entry point into the vessel.

FDM Mini Float Level Switch

The FC/FD Series is a mini magnetic float level switch product line that is very cost-effective and compact. As such these magnetic float level switch units are easily installed on small machinery and in areas where very little space is available inside/outside the vessel in which they are installed.

FAB Cable Float Level Switch

The FA/FB Series is a cable float level switch product line constructed from a variety of chemical resistant materials. These are durable, low-cost, simple and easy-to-use float level switches equipped with either a microswitch, reed switch or mercury switch output.

SCX1 Vibrating Probe Level Switch

The Finetek vibrating probe switch is highly versatile and can be used for most almost any bulk solid application. This includes level detection of almost any granular, sandy, chip like, foodstuff, grain or powdery materials. The operating principle is based on the changes of vibration frequency of the tuning fork when it comes into contact with a liquid or solid material.. The Vibrating probe contains piezoelectric crystals built into the vibration tube that produce vibrations/resonations at specific frequencies. One element acts as a transmitter of the signal and the other receives the signal and converts it to electrical output. When the Vibrating probe comes in contact with material the vibration is weakened/dampened and results in a frequency change which triggers the switch. It’s ideal for applications where: the dielectric constant is low (where capacitance level switches can’t be used) ; when material moisture content changes easily; low viscosity liquids; there is a combination of differing materials in the container/tank. The Vibrating probe provides a reliable & maintenance-free means of process control for bulk solids. Easy mounting at almost any angle and basic calibration procedures will provide reliable functioning and less required monitoring. This device can withstand tough lateral loads and static electricity. Furthermore, it eliminates the application issues associated with jamming and clogging between tines on a ‘tuning fork’ device Also; it is equipped with a Fail-safe that prevents malfunctioning caused by power cuts

SAX Capacitance Level Switch

The Fine-tek Capacitance Switch for liquids and solids can be used in mediums such as liquids, pastes, syrups, powders, granules, flakes and chips. It’s broad application and rugged build makes it a highly versatile across all industries. Capacitance switches rely on electrical capacitance theory (the ability of a medium to store electrical energy). When an electrical circuit has two separated conductive plates, the space between the plates acts as a capacitor and stores the electrical energy. Mediums have differing conductivity and dielectric constants which affects their energy sstorage capability. When the switch comes into contact with the medium, it can detect a change in the surroundings and this actuates the switch accordingly. Materials with high conductivity or high dielectric constants such as water tend to have high capacitance. The opposite applies for low conductive substances such as popcorn, wax or air. Thus the switch works well in mediums with reasonably high dielectric constants or conductive solutions.

SE Rotary Paddle Level Switch

The SE series operating principle is simple. A unit is usually located through a bin wall at the top, middle or low level of a bin. During normal operation (no material present) a synchronous motor rotates the paddle at 1 RPM. When this paddle rotation is impeded by material, surroanding the paddle, motor will stall and cause the Micro switch to change state. (indicating an alarm or control) Product Introduction.

EAX Ultrasonic Level Transmitter

The ultrasonic level transmitter is a non-contact, low-cost and easy-to-install measuring device. It can be applied to most industrial applications for both solids and liquids. Most important aspect of is that it is easy-to-install and low maintenance due to no moving parts.

JTR Guided Wave Radar Level Transmitter

  • Meets the various measurement requirements of different temperature, pressure and medium.
  • Contact measuring, capable of overcoming the steam, foam and stirring effects.
  • 4~20 mA / 2 lead wires, simple wiring, low
  • power consumption (2.4W max.).
  • 128*64 LCM Display, easy on-site adjustment.
  • Unique algorithms and echo wave processing technology can be used under various types of complex work conditions.

SQX Pressure Switch

The SQ Series pressure switch is available in a wide variety of configurations. The SQ pressure switch utilizes an internal diaphragm which is subjected to the process pressure through a connection in the application. A variety of fixed or adjustable ranges, and electrical connections, are available.

ECX Pressure Level Transmitter

EC Series is a hydrostatic pressure level transmitter product line that uses piezoresistive technology and a Wheatstone bridge electrical circuit to measure the level of a fluid in a vessel and provide a variable analog output.

JFR FMCW Radar Level Transmitter

The JFR Series is a open-air radar level transmitter designed for measuring the changing level of liquids, slurries and bulk solids in tanks, bins and silos. Operating at either 10GHz or 26GHz the JRF series radar level transmitter products will provide non-contact continuous level measurement with high accuracy and reliability.

EGX Magnetostrictive Level Transmitter

The EG Series is a magnetostrictive level transmitter used to accurately measure the changing level of liquids. The EG magnetostrictive level transmitter uses the principles of buoyancy and magnetostriction. Single and two-float designs are available.

EFX By-Pass Level Transmitter

EF/MEF Series are by-pass level transmitter product lines, more commonly know as magnetic level gauge devices that can be equipped for local visual indication only or with level switches and an electronic level transmitter output. The magnetic level gauge units include their own self-contained chamber that would be mounted to the vessel, typically via side connections at the top and bottom areas of the EF/MEF by-pass chamber. The EF is standard size and MEF is a smaller “mini” version. These magnetic level gauge units are safer than glass gauges that they typically replace.

EBX RF-Capacitance Level Transmitter

The EB5 Series is an RF admittance level transmitter that continuously measures the changing level of a powder, granular or liquid material within a containment vessel. The RF admittance level transmitter measures the changing capacitance between the sensing probe and the reference ground (reference probe or metal wall of the vessel) to determine the level of the material in the vessel.

FGX Magnetic Float Level Transmitter

The FG Series is a magnetic float level transmitter comprising a float and sensing guide rod. The float is sized (volume and weight) based on the density of the fluid to be measured. As the liquid in the vessel travels up and down, the float will rise and fall on the sensing rod. The magnetic float level transmitter has a resistance output directly proportional to float position, fluid level.

SPX Thermal Dispersion Flow Switch

SP Series is a thermal dispersion flow switch is a precise flow sensing device for liquids. The principle of operation is based on heat transfer. The SP thermal dispersion flow switch is offered with a variety of output types and materials of construction. No moving parts make the SP series a long lasting and high value flow switch.

SFX Paddle Type Level Switch

SF Series is a paddle flow switch for use with a wide variety of fluids. The paddle flow switch uses the force of the liquid flow to actuate a reed switch. It can be activated by as little as 5gpm (19.4l/m) flow.

EPD Electromagnetic Flow Meter

The very FIRST Electromagnetic flow meter (EPD) to be certified by OIML in Asia

EPD30 offers the industry’s widest range of liners, electrodes and sizes to meet the needs of even the most demanding process applications in sectors as diverse as chemical, power, oil & gas and metals & mining. The powerful transmitter is easy to use and provides the output signal that meets your needs. With EPD30 you get a versatile, reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation.

EPR Paddle Wheel Flow Meter

Paddle wheel flowmeter mainly by using the principle of rotating blades to measure flow. Mainly by the middle of the leaf blade and the leaf blade capacity calculated. In the structural design of the product, Leaf blade need to be able to satisfy a sufficient change in the linear velocity 0~10m/s. Its apparent volume miniaturization design. Within the range of performance requirements, It can not produce a total shock to let the speed is reduced.
The sensor requires actual measurement to get real flow signals, Elimination of bearing、Axial friction coefficient error and the leaf blade resistance error etc. Calculate the K value read. The company’s flow test equipment, Testable 10mm~300mm mouth Diameter flow sensor.

ECX Pressure Level Transmitter

EC Series is a hydrostatic pressure level transmitter product line that uses piezoresistive technology and a Wheatstone bridge electrical circuit to measure the level of a fluid in a vessel and provide a variable analog output.

EEX Electromechanical Level Measuring System

The EE300 Series is an electromechanical inventory level measuring system which uses state-of-the-art third generation weight & cable technology to periodically measure the level of liquid and bulk solid materials held in storage. The EE300 series level measuring system includes the EE300 sensor and available RCU remote control unit or MMS-TL PC-software.

TRX Temperature Transmitter

  • Supply Voltage: Loop Power 18~32 Vdc
  • DCV Input: 0~500 mV/ 0~1V/ 0~5V/ 0~10V/ 0~20V
  • DCA Input: 0~20 mA/ 4~20 mA
  • Thermocouple Input: K / J / T / E / R / S / B / N
  • RTD/ Resistance Input: PT100/0~400W
  • Analog Output: 4~20 mA (Loop Power)
  • Ambient temperature: -20~60°C
  • Galvanic Isolation: 1500V

EST120 temperature & level monitoring transmitter

The EST Series is a grain temperature monitoring system consisting of the EST110 and EST120 sensors and MMS-TLA PC-software. The EST110 sensor cable is for temperature sensing only, the EST120 is for temperature/level monitoring from a single cable. Simplified installation and start-up using 1-wire digital temperature sensors. More cost-effective than thermocouple based systems.

EST110 Multi-point temperature sensor

The EST Series is a grain temperature monitoring system consisting of the EST110 and EST120 sensors and MMS-TLA PC-software. The EST110 sensor cable is for temperature sensing only, the EST120 is for temperature/level monitoring from a single cable. Simplified installation and start-up using 1-wire digital temperature sensors. More cost-effective than thermocouple based systems.

MMS-TLA Materials Management System

MMS Series is a materials management system product line including two software packages designed to run on most all PC’s. This includes the MMS-TL tank level inventory materials management system and the MMS-TLA grain temperature monitoring system.


These devices are operated in Wireless or Wired versions for expanding connected to measuring sensors. 4 ports 4-20mA or 4 ports RS-485, 4 ports 1-wire and 4 port I/O communication is selectable to meet demands of applications.


The devices of Wireless Monitoring Total Solution are managed with the MMS. It allows users to create a network, add device to a network, defines parameters and monitor measuring data.


It collects data from end nodes and communicates with backbone monitoring systems. They increase broadcast transmission distance and implement peer-to-peer communication.

End device

It supports every single sensor to communicate through wireless mode directly

BAH Series Air Hammer

  • Highly strengthened aluminum body
  • Low frequency/ continuous impact model, sudden activation/ deactivation is allowed
  • Frequency and amplitude of impact can be adjusted as required
  • Direct impact onto target object to produce the optimum vibration feedback

BVP Series Pneumatic Vibrator

BV Series is a group of pneumatic industrial vibrators of the piston and rotary types. The rotary industrial vibrators include ring, ball and turbine types.

BRD/BDV Series Diaphragm Valve

The BRD/BDV series are used specifically as dust collector valves in dust collector systems. Each valve consists of two air chambers divided by a diaphragm. The two models, BRD and BDV, perform the same function with slightly different designs. They are used to provide a sudden burst of air pressure into dust collector filter bags for cleaning purposes.

RA Air Pad

RA Series is a rectangular style bin aerator, used primarily in concrete production plants to fluidize cement powder and flyash. These cost-effective and reliable aerators can be used to aerate or fluidize most powders.

TX10 Explosion-poof Isolated safety barrier

Isolated safety barrier provides power supply to transmitters located in hazardous zone and transmit isolated supply current signal to safe zone. Max. input 0~20mA which can be transformed to different analog outputs, such as 0~20mA / 4~20mA / 0~5V / 0~10V.

EDX Speed Monitor

The SRS/SRT/ED belt conveyor safety products use various electromechanical and electronic technology to protect equipment and personnel. These safety devices include:

– SRT belt misalignment switch
– SRS safety stop switch
– ED series speed monitor

SRT Conveyer Belt Misalignment Switch

The SRS/SRT/ED belt conveyor safety products use various electromechanical and electronic technology to protect equipment and personnel. These safety devices include:

– SRT belt misalignment switch
– SRS safety stop switch
– ED series speed monitor

SRS Safety Cable Pull Switch

The SRS/SRT/ED belt conveyor safety products use various electromechanical and electronic technology to protect equipment and personnel. These safety devices include:

– SRT belt misalignment switch
– SRS safety stop switch
– ED series speed monitor

PM Display Scaling Meter

PB/PM Series is a product line of panel meters including bargraph and/or digital displays. A variety of input types are available, including 2-wire analog input (transmitter power supply included as standard). These panel meters are cost-effective, packed full of features and easy to install and setup.

PT PID+Fuzzy Temperature Controller

The 76 series programmable temperature controller is FineTek’s high-end controller. Equipped with a 14 bit analog/ digital converter core processor and with FUZZY and improved PID calculation microprocessor, the controller is capable of fast and accurate performance with reliable results. Double row of 4 digit displays indicates Present Value and Set Value (except PT7610), enables user friendly readings and coupled with 3 buttons operation, it makes operating the controller very convenient.

53 Series programmable temperature controller is FineTek’s mid-range series of controllers. It uses a 12bit analog / digital converter core processor for fast performance and provide reliable and stable results. Dual rows of 3 digits LED display gives clear and simple read outs of present value and set value. Operating by 4 buttons platform and user have ease of usage and user-friendly interface

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Filter by Categories